Model charts for Lucerne (Temperature)

ARPEGE

Model charts

Change map selection Hide map selection

Country maps
Free zoom

Map section

Area

Country

Canton

District

Change parameters Hide parameter selection

Most used
All

Most used parameters

These are the parameters most frequently viewed by our users. See all our parameters under the "all" tab

Mean Sea Level Pressure (mbar) Temperature (°C) Temperature (°F) Dew point (°F) Wind direction and mean wind speed (mph) Cloud coverage (%) Precipitation, 3h (in) Precipitation, 24h (in) Accumulated total precipitation (in) Surface based CAPE (J/kg) Temperature, 850mbar (°C) Theta-E and Geopot, 850mbar (°C) Temperature, 500mbar (°C)

All parameters

Here you will find all the parameters available for this model sorted into groups. Click on the respective group to display the parameters. If you don't see your desired parameter, try scrolling a bit down the list.

Weather, pressure

Mean Sea Level Pressure (mbar)

Temperature and humidity

Temperature (°C) Temperature (°F) Relative humidity (%) Dew point (°F)

Heat flux, moisture flux, evaporation

Sensible heat flux at the surface (Wh/m²) Latent heat flux at the surface (Wh/m²) Accumulated evaporation (mm) Evaporation 24h (mm)

Wind, gusts, direction

Wind direction and mean wind speed (mph) Mean wind speed (mph) with stream lines

Clouds, sunshine, short wave radiation

Short wave radiation, 1h-avg, last 3h (Wh/m²) Cloud coverage (%) Low clouds, coverage (%) Middle clouds, coverage (%) High clouds, coverage (%)

Precipitation: rain, snow, hail

Precipitation, 3h (in) Precipitation, 24h (in) Precipitation, 24h (Snow) (in) Accumulated total precipitation (in) Accumulated total precipitation (Snow) (in)

Severe Weather Parameters

Surface based CAPE (J/kg) Lifted Index, 850mbar (K) Theta-E 850mbar (°C), Wind und LI Entire Atmosphere Precipitable Water (in)

Flight meteorology

Planetary Boundary Height (m AGL)

Pressure level - 925mbar / ~2,300 ft

Temperature, 925mbar (°C) Relative Humidity, 925mbar (%)

Pressure level - 850mbar / ~5,000 ft

Temperature, 850mbar (°C) Relative Humidity, 850mbar (%) Theta-E and Geopot, 850mbar (°C)

Pressure level - 700mbar / ~10,000 ft

Temperature, 700mbar (°C) Relative Humidity, 700mbar (%)

Pressure level - 500mbar / ~18,000 ft

Temperature, 500mbar (°C) Relative Humidity, 500mbar (%)

Pressure level - 300mbar / ~30,000 ft

Temperature, 300mbar (°C) Relative Humidity, 300mbar (%)

Change model and model run Hide model selection

Model run

Toggle between all the models that provide a forecast for the selected map domain. Please note that not all parameters are available for each model.

Weather model

Swiss HD 1x1 Swiss HD 1x1 (MOS) ICON-D2 ICON-RUC Swiss-MRF AROME AROME-PI Swiss HD 4x4 Swiss HD 4x4 (ECMWF) Swiss HD Nowcast ICON-EU ICON-EU (Flash) HARMONIE MULTI-CEUR HARMONIE (DMI) UKMO UK ICON CH1 ICON CH2 ECMWF 6z/18z ECMWF IFS HRES 0z/12z ECMWF AIFS ICON GFS UKMO ARPEGE GEM ACCESS-G CMA GDAPS/UM MULTI-GLOBAL JMA GFS 0.125°

Select models that are currently not active but available through our big model archive.

Weather model

COSMO-D2 EURO-4 HIRLAM-FMI HIRLAM RUSSIA ECMWF IFS (48r1) GFS/FV3

Switch easily between all models for which an equivalent map (same parameter and same time but different model) is available.

Weather model

ARPEGE

Change date Hide date selection

Notice

Unfortunately there are no current charts available for this weather model. Please try again later or choose an older model run from our archive.

Model chart animation

You need a plus subscription for our additional features to be able to use our model charts player.

More information

Lucerne

ARPEGE (5 days)

Temperature (°C)

Update times: ca. 11:30pm, 05:15am, 11:30am and 05:15pm

Forecast from Mon. 05/19/2025 07:39pm until Mon. 05/19/2025 07:39pm

We're producing your requested images. This may take a while, please be patient.

The dearchivation takes up to one minute. Please be patient.

Source: Météo-France